Kindle 4 NT (Non-Touch) stuck at loading screen after jailbreak and factory reset.

October 21, 2015, 10:31 pm

≫ Next: Cloud Reader A furhter question of the kind: how can I access my personal documents through my PC?

Hi everyone, :)

This is my first post and thread on this forum ( Yay ! ), so please be kind to me. I really needed help.

So I had just accumulated enough courage to jailbreak my Kindle 4 NT that my cousin gave me a while ago (after said cousin broke the e-ink but I got a spare off e-bay for cheap then replace the screen ). I did it using this link : http://wiki.mobileread.com/wiki/Kindle4NTHacking

Although that it worked perfectly, I decided to wipe it using kindle's reset menu since I don't want my cousin's book to be on there ( an action which I would then soon regret) after it is jailbroken. It all went south from there.

My newly repaired kindle is now stuck at loading screen.

It has a weird symptoms as follows

1. The computer would detect the kindle when it is connected via usb cable and mount ( This is on a Windows PC) while showing the stuck loading screen

2. I can also make it go to diagnostic mode by creating ENABLE_DIAG blank file on kindle drive from 1 or using magic down key and power button with MfgTool.

3. The usbnet thing worked and I was able to SSH into it, including flashing the image onto the kindle. But it had no effect ( no error on dd)

Here are the things that I had tried so far.

- 1. draining battery and charge it up again (to no avail) :smack:

- 2. tried using kubrick CD to restore it. Got nothing either :blink:
( It has finished its task, but after rebooting it still stuck at loading screen )

- 3. I also tried using MfgTool + down key power sequence to enter diagnostic mode then setup usbnet and SSHed into the kindle. I then flashed the mmcblk0p.img (ver 4.0.0) using dd then reboot to no avail. ( per information on http://www.mobileread.com/forums/sho...d.php?t=169645)

-4. I also remove everything in /var/local but still no effect.

Can anyone help me on this matter, I really don't want to buy a new kindle since I just spent money fixing the e-ink screen.

Thank you in advance
Mo:thanks:

PS: Here are some of the pictures
http://imageshack.com/a/img907/6283/k1Kwly.jpg
http://imageshack.com/a/img905/7991/2qtW3k.png
http://imageshack.com/a/img905/8198/OmuLks.png

↧

Cloud Reader A furhter question of the kind: how can I access my personal documents through my PC?

October 22, 2015, 5:08 am

≫ Next: PW3 Use kindle-jailbreak-1.14.N.zip on Paperwhite 3

≪ Previous: Kindle 4 NT (Non-Touch) stuck at loading screen after jailbreak and factory reset.

I've already done a good amount of searches in this forum and maybe still would need to, but I could not afford to spend too much time on searching, so I felt obliged to post. I'll try to be as short as possible. Also, I thought it would be nice if this could be an updated reference for other users experiencing the same problem. (Provided there's any need for this.)

I own a 2nd generation Kindle Paperwhite, and as many others I'd need to access my personal documents via the Cloud Reader browser app - with highlights, notes, reading progress and more all synced.

We know that Amazon restricts this. So my question is: is there any supported way or workaround allowing me to do this? Alternatively, is there any software for jailbreaked devices that permits these features? (I just glanced at this, just for example. I have indeed a very broad idea of it.)

I must also ask you, and I really care about this, how other manufacturers handle this. Does Kobo, for example, allow accessing personal documents through the web reader? What about other producers? I'd be really interested in them and willing to switch.

For now, the only workable solution I've found is that of installing an Android emulator - in my case - in which to run the Kindle reader app. But maybe this is just an expedient and better solutions do really exist.

Looking forward any of your inputs. :)

↧

PW3 Use kindle-jailbreak-1.14.N.zip on Paperwhite 3

October 22, 2015, 5:27 am

≫ Next: Kindle 2 enter button problem

≪ Previous: Cloud Reader A furhter question of the kind: how can I access my personal documents through my PC?

Hello Everybuddy,

I used these forum a lot in the last years but these is my first post.

I managed to Jailbreak the PW3 with these Tutorial:
http://www.mobileread.com/forums/sho...d.php?t=263113

Everything worked nicely and I am happy.

I have Several Problems so far. The Main problem is that any .bin file gets removed by the Kindle after placing it at the root system. I can not chose "Update Kindle" because after reconnection the USB the .bin file is gone.

For Example I would like to install the USBNet from here:
http://www.mobileread.com/forums/sho...d.php?t=186645

But the .bin file gets always removed.

I want to install the USBnet because i want to use these Manual to remove the adds: REDACTED. I could do these by the Serial connection. But then I need to open the Kindle again and i am not sure how often the glue sticks properly.

My other Problem is that i would use the coolreader inside of the KUAL.
KUAL is working and also the HELPER file from KUAL is working.
But i do not manage to get vlasovsoft running from here:
http://wiki.vlasovsoft.net/doku.php?id=en:pbchess-1.2.6#amazon_kindle
I copied the files exactly how it says in the file:

vlasovsoft folder into flash root
Copy the extensions folder into flash root

But nothing works the Kindle goes back to the main screen when I tap "vlasovsoft" in the KUAL program.

I think there is a general Problem with the Kindle Paperwhite 3 and the Jailbreak which I used because to many thinks seem not to work properly.

I would be very happy if i can have some feedback what i could do to fix some of the issues.

Kind regards Alex

↧

Kindle 2 enter button problem

October 22, 2015, 11:30 am

≫ Next: How can I Find My Ebooks? [ PW2]

≪ Previous: PW3 Use kindle-jailbreak-1.14.N.zip on Paperwhite 3

Hello everyone, I've received a used Kindle 2 from someone and the enter button, acts like a delete function not as a confirming one. Can't open things. I'm thinking a software issue?

How to upgrade? On their site I have the option to manually upgrade, transfering the update through usb cable but still needs a action button, like enter to select it.

Any idea?

Thanks!

↧

How can I Find My Ebooks? [ PW2]

October 23, 2015, 8:15 am

≫ Next: Current Kindle clipping converters and organizers

≪ Previous: Kindle 2 enter button problem

I purchased 10 ebooks Direct from Amazon & Side loaded 20 more! Calibre shows them on the PW2.... Yet I Cant find them. :blink: This isn't the 1st time I haven't been able to find ebooks. Last time I Downloaded & Side loaded them again then they ALL showed up now I can delete the duplicates! I really beginning to Hate this eReader :angry:
:help:

↧

Current Kindle clipping converters and organizers

October 23, 2015, 9:17 am

≫ Next: PW2 Unable to reset my pw2 on firmware 5.6.1.0.6

≪ Previous: How can I Find My Ebooks? [ PW2]

I'm trying to figure out the best way to convert the myclippings.txt into individual .mobi or text files so that I can then import back to the Kindle, with only the highlighted sections and not the repeated book title and bookmark information.

Anyone have insight on a current easy way to do this? Please discuss

↧

PW2 Unable to reset my pw2 on firmware 5.6.1.0.6

October 24, 2015, 7:06 am

≫ Next: My Kindle DXG keep random freeze when on screen saver?

≪ Previous: Current Kindle clipping converters and organizers

Hi guys,
Tried searching for my problem but seems like I am the only one facing this problem.

I have a kindle pw2
The firmware is 5.6.1.0.2

I m unable to reset the device. Whenever I reset it. It goes back into some old setting .

The process is like
1. Reset kindle (used all possible methods). Tried deregisteration as well. No fun
2. Device reboots.
3. All books are on device. Forgotten wi fi
4. Shows device registered in my name (without me even entering any details)
5. I enter wi fi password, the device is now de registered, but all books still on my device. Even if I delete books one by one (or from pc), the books keep reappearing.
6. Registered the device to a different Amazon account. All the books are still on the device.
7. New side loaded books are removed automatically.
8. If I restart(not reset) the device the device reverts back to point 3.
9. The firmware update is showing greyed out.
10. Tried manual update but the device keeps deleting the update (5.6.5).

So friends, help me by either pointing to some new method. I can open the device but I need help my be in form of some video or step by step guide.

Hope I have made your weekend worthwhile. 😜😜😜

↧

My Kindle DXG keep random freeze when on screen saver?

October 24, 2015, 8:58 am

≫ Next: KT2 U1102 Identification

≪ Previous: PW2 Unable to reset my pw2 on firmware 5.6.1.0.6

My Kindle DXG keep random freeze when on screen saver, I had to hold the swith button to restart.

Anyone else get this problem, and fixed this?

*Maybe it's have something with duokan, I don't know, I usually use duokan system to read comic.

↧

KT2 U1102 Identification

October 24, 2015, 11:04 am

≫ Next: K3 Alternate Jailbreak method -> 5-way controller broken

≪ Previous: My Kindle DXG keep random freeze when on screen saver?

I have not been able to identify this part.
Tried both visible light and strong UV light.

Did check a few semi-conductor catalogs for a six pin device with D- and D+ run to those pins, without any luck.
Which just means that I couldn't find it, not that it isn't in someones catalog.

What I did not check was application notes from Freescale.
They might have something with recommended parts to use on the OTG port.

Attached Thumbnails

Click image for larger version

Name: u1102.jpeg
Views: N/A
Size: 1.12 MB
ID: 143138

↧

K3 Alternate Jailbreak method -> 5-way controller broken

October 24, 2015, 12:29 pm

≫ Next: Kindle Voyage Review (from the guy who wrote that jumbo Kindle vs. Kobo article)

≪ Previous: KT2 U1102 Identification

Hello,

My 5-way controller is broken, and I want to reassign keys in order to keep using my K3w.

The Jailbrake method i've found requires the 5-way keys in order to select the "Update Kindle" option.

Is there an alternate way (auto-update, through terminal, etc) to jailbreak the Kindle? Basically, my "enter" key is broken and I can't do anything useful with the keyboard besides navigating on the main screen ://///

↧

Kindle Voyage Review (from the guy who wrote that jumbo Kindle vs. Kobo article)

October 24, 2015, 1:40 pm

≫ Next: 5.6.5 jailbreak and Amazon's vertical integration/monopoly

≪ Previous: K3 Alternate Jailbreak method -> 5-way controller broken

Hi folks, me again!

I'm sharing another article I recently published. If you recall, a while ago I posted a very in-depth examination of how Kindles and Kobo e-readers compare and was delighted at how much great feedback and discussion was sparked around here.

At the time, I was only given access to the Kobo Aura H2O and the Paperwhite 1 & 2. Since then, I've been able to spend time with the Paperwhite 3 andfinallythe Voyage, which still isn't available in Canada.

This is mostly a review of the Voyage and how it compares to the Paperwhite 3, but I also take some time later in the article to speculate about some potential future paths for the product line.

Without further ado:

Amazon Kindle Voyage Review

As always, I hope it's helpful!

And for the record, I don't run ads of any kind on my blog, nor do I use affiliate links or any other form of sneaky monetization, so you can read in peace.

↧

5.6.5 jailbreak and Amazon's vertical integration/monopoly

October 25, 2015, 11:00 am

≫ Next: Hacks Asking for a way to extend dictionary box on K4NT

≪ Previous: Kindle Voyage Review (from the guy who wrote that jumbo Kindle vs. Kobo article)

[Split off from http://www.mobileread.com/forums/showthread.php?p=3194110#post3194110 -- moderator]

To be honest - this was my presumption as well. I dont know which discussions are going on in the background - take your time, figure it out. Hopefully. :)

You all missed another important discussion here already - perhaps, because you are looking so intently at the "service" part - when you are discussing what this community provides -

That amazon now controls

- the format (proprietary nature of kfx (format))
- the distribution (only Amazon can distribute kfx)
and
- production (only Amazon can produce kfx)

really warrants a discussion, that did not take place in here at all. In Germany we have media science professors at the largest political/industry/media summits of the year talking about the new concept of "the industrialisation of distribution formats" - where all cultural aspects are stripped away from what we in the past called media (in this case an eBook).

This hasnt been the topic of discussion on the international level at all.

This is me saying - think about the issues, take your time - but eventually, be productive - because, our societies need this group of people.

↧

Hacks Asking for a way to extend dictionary box on K4NT

October 27, 2015, 10:18 am

≫ Next: Is my Kindle Voyage screen broken

≪ Previous: 5.6.5 jailbreak and Amazon's vertical integration/monopoly

Hi there,
I'm new to this forum, so let say nice to meet all of you.
I am a non-native English speaker so sorry for my poor English.
I have a 3 years old Kindle Basic 2012 firmware 4.1.3 and I still love it very very much. Yesterday I've just come across this forum and for the first time knowing that my K4 can be jailbroken. Yay!
And now after installed fonts, screensaver,... I wonder if there's any hack that allow my K4 to extend its vocabulary box. Sometime the box is too small that I can't see enough words to understand a new vocabulary and I have to open Full definition, it's really slow and distracted.
Thank you very much!

↧

Is my Kindle Voyage screen broken

October 27, 2015, 3:28 pm

≫ Next: Restrictions on sideloading?

≪ Previous: Hacks Asking for a way to extend dictionary box on K4NT

Hi,

My Kindle Voyage started to act weard. It powers on (front light comes on) an then reboots. I had it jaibroken and have attached the serial output.

I think its the screen or the controller. To you know if there is a software solution to fix this?

Code:

U-Boot 2009.08-lab126 (Feb 17 2015 - 13:30:25)



CPU: Freescale i.MX6 family TO0.0 at 996 MHz

Temperature:   38 C, calibration data 0x5a551f5f

mx6sl pll1: 996MHz

mx6sl pll2: 528MHz

mx6sl pll3: 480MHz

mx6sl pll8: 50MHz

ipg clock     : 66000000Hz

ipg per clock : 66000000Hz

uart clock    : 80000000Hz

cspi clock    : 60000000Hz

ahb clock     : 132000000Hz

axi clock   : 198000000Hz

emi_slow clock: 22000000Hz

ddr clock     : 396000000Hz

usdhc1 clock  : 198000000Hz

usdhc2 clock  : 198000000Hz

usdhc3 clock  : 198000000Hz

usdhc4 clock  : 198000000Hz

MMC:  FSL_ESDHC: 0,FSL_ESDHC: 1,FSL_ESDHC: 2

Board: Icewine WFO 512

Boot Reason: [ POR ]

Boot Device: NAND

Board Id: 04809011519202IE

S/N: B01309075212001R

I2C:   ready

DRAM:  512 MB

Using default environment



In:    serial

Out:   serial

Err:   serial

Quick Memory Test 0x80000000, 0x1fff0000

POST done in 116 ms

Battery voltage: 3956 mV



check_haptic: ID = 0x07

Hit any key to stop autoboot:  1  0 

## Booting kernel from Legacy Image at 80800000 ...

   Image Name:   Linux-3.0.35-lab126

   Image Type:   ARM Linux Kernel Image (uncompressed)

   Data Size:    2593928 Bytes =  2.5 MB

   Load Address: 80008000

   Entry Point:  80008000

   Verifying Checksum ... OK

   Loading Kernel Image ... OK

OK



Starting kernel ...



[    0.097940] 

[    0.270904] LPDDR2 MfgId: 0x3 [Elpida]

[    0.274889] 

[    0.274892] just text: vaddr c013f678, va 0xc013f200 pa 0x801000c3 attr 0x6

[    0.287434] 

[    0.287437] nmx6sl_wfi_iram: vaddr e084e000, va 0xe084e200 pa 0x904043 attr 0x2

[    0.296282] 

[    0.296285] mx6sl_ddr: vaddr e0856000, va 0xe0856200 pa 0x905043 attr 0x2

[    0.304611] 

[    0.304614] mx6sl_iomux: vaddr f40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x149

[    0.315451] 

[    0.315453] ANATOP: vaddr f40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149

[    0.329800] 

[    0.329803] CCM: vaddr f40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149

[    0.341946] 

[    0.341949] MMDC_P0: vaddr f41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149

[    0.352367] 

[    0.352370] L2: vaddr f2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149

[    0.362323] 

[    0.362326] arm perif: vaddr f2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149

3.0.35-lab126 #1 PREEMPT Wed Apr 15 11:43:56 PDT 2015 armv7l

[    1.726924] max77696-epd max77696-epd.0: EPDINT: Regulator Fault Detected [12]

[    1.734207] Regulator Fault Occurred! Retrying powerup...

[    1.805584] max77696-epd max77696-epd.0: EPDINT: Regulator Fault Detected [12]

[    1.812854] Regulator Fault Occurred! Retrying powerup...

[    1.885590] max77696-epd max77696-epd.0: EPDINT: Regulator Fault Detected [12]

[    1.892886] Regulator Fault Occurred! Retrying powerup...

^@^@ª9ð^@^@[    1.922413] imx_epdc_fb imx_epdc_fb: EPDC powerup timeout/error.

[    1.982439] max77696-epd max77696-epd.0: EPDINT: Regulator Fault Detected [12]

[    1.989678] Regulator Fault Occurred! Retrying powerup...

[    2.065599] max77696-epd max77696-epd.0: EPDINT: Regulator Fault Detected [12]

[    2.072868] Regulator Fault Occurred! Retrying powerup...

[    2.145597] max77696-epd max77696-epd.0: EPDINT: Regulator Fault Detected [12]

[    2.152864] Regulator Fault Occurred! Retrying powerup...

[    2.173326] imx_epdc_fb imx_epdc_fb: EPDC powerup timeout/error.

[    2.233549] max77696-epd max77696-epd.0: EPDINT: Regulator Fault Detected [12]

[    2.240787] Regulator Fault Occurred! Retrying powerup...

[    2.315601] max77696-epd max77696-epd.0: EPDINT: Regulator Fault Detected [12]

[    2.322869] Regulator Fault Occurred! Retrying powerup...

[    2.395611] max77696-epd max77696-epd.0: EPDINT: Regulator Fault Detected [12]

[    2.402878] Regulator Fault Occurred! Retrying powerup...

[    2.423327] imx_epdc_fb imx_epdc_fb: EPDC powerup timeout/error.

[    2.429367] imx_epdc_fb imx_epdc_fb: Failed to do initialization sequence -901



=== kernel printk buffer (23126 bytes) ===

<5>[    0.000000] Linux version 3.0.35-lab126 (jenkins-official@sjc10-jbuild08) (collect2: ld returned 1 exit status) #1 PREEMPT Wed Apr 15 11:43:56 PDT 2015

<4>[    0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d

<4>[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache

<4>[    0.000000] Machine: Freescale i.MX 6SoloLite based Wario Board

<6>[    0.000000] Will try to place printk log at 8fffc000

<4>[    0.000000] Memory policy: ECC disabled, Data cache writeback

<6>[    0.000000] CPU identified as i.MX6SoloLite, silicon rev 1.2

<7>[    0.000000] On node 0 totalpages: 131072

<7>[    0.000000] free_area_init_node: node 0, pgdat c05395b8, node_mem_map c2000000

<7>[    0.000000]   DMA zone: 64 pages used for memmap

<7>[    0.000000]   DMA zone: 0 pages reserved

<7>[    0.000000]   DMA zone: 8128 pages, LIFO batch:0

<7>[    0.000000]   Normal zone: 960 pages used for memmap

<7>[    0.000000]   Normal zone: 121920 pages, LIFO batch:31

<7>[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768

<7>[    0.000000] pcpu-alloc: [0] 0 

<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048

<5>[    0.000000] Kernel command line: rootwait log_pos_goal=0x8fffc000 console=ttymxc0,115200 root=/dev/mmcblk0p1 ro ip=off quiet video=mxcepdcfb:E60,bpp=8,x_mem=3M

<4>[    0.000000] Prink buffer will be relocated to physical address: 8fffc000

<6>[    0.000000] log_buf_len: 32768

<6>[    0.000000] early log buf free: 31330(95%)

<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)

<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

<6>[    0.000000] Memory: 512MB = 512MB total

<5>[    0.000000] Memory: 514184k/514184k available, 10104k reserved, 0K highmem

<5>[    0.000000] Virtual kernel memory layout:

<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

<5>[    0.000000]     DMA     : 0xfde00000 - 0xffe00000   (  32 MB)

<5>[    0.000000]     vmalloc : 0xe0800000 - 0xf2000000   ( 280 MB)

<5>[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)

<5>[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)

<5>[    0.000000]       .init : 0xc0008000 - 0xc012c000   (1168 kB)

<5>[    0.000000]       .text : 0xc012c000 - 0xc0505000   (3940 kB)

<5>[    0.000000]       .data : 0xc0506000 - 0xc053a0e0   ( 209 kB)

<5>[    0.000000]        .bss : 0xc053a104 - 0xc055f960   ( 151 kB)

<6>[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

<6>[    0.000000] Preemptible hierarchical RCU implementation.

<6>[    0.000000]         Verbose stalled-CPUs detection is disabled.

<6>[    0.000000] NR_IRQS:624

<6>[    0.000000] MXC GPIO hardware

<6>[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms

<6>[    0.000000] arm_max_freq=1GHz

<6>[    0.000000] MXC_Early serial console at MMIO 0x2020000 (options '115200')

<6>[    0.000000] bootconsole [ttymxc0] enabled

<6>[    0.000000] Console: colour dummy device 80x30

<6>[    0.000266] Calibrating delay loop... 1987.37 BogoMIPS (lpj=9936896)

<6>[    0.060122] pid_max: default: 32768 minimum: 301

<6>[    0.060375] Mount-cache hash table entries: 512

<6>[    0.060726] CPU: Testing write buffer coherency: ok

<6>[    0.060872] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available

<6>[    0.067694] print_constraints: dummy: 

<6>[    0.067860] NET: Registered protocol family 16

<6>[    0.072292] print_constraints: vddpu: 725 <--> 1300 mV at 700 mV fast normal 

<6>[    0.072609] print_constraints: vddcore: 725 <--> 1300 mV at 1475 mV fast normal 

<6>[    0.072923] print_constraints: vddsoc: 725 <--> 1300 mV at 1475 mV fast normal 

<6>[    0.073248] print_constraints: vdd2p5: 2000 <--> 2775 mV at 2400 mV fast normal 

<6>[    0.073608] print_constraints: vdd1p1: 800 <--> 1400 mV at 1100 mV fast normal 

<6>[    0.073939] print_constraints: vdd3p0: 2625 <--> 3400 mV at 3000 mV fast normal 

<4>[    0.075691] LAB126 Board id - 04809011519202IE

<6>[    0.080383] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.

<6>[    0.080397] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.

<6>[    0.080409] hw-breakpoint: maximum watchpoint size is 4 bytes.

<6>[    0.080427] L310 cache controller enabled

<6>[    0.080438] l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x02030000, Cache size: 262144 B

<6>[    0.089687] bio: create slab <bio-0> at 0

<6>[    0.094002] max77696> regulator init

<6>[    0.094992] spi_imx imx6q-ecspi.0: probed

<6>[    0.095403] usbcore: registered new interface driver usbfs

<6>[    0.095531] usbcore: registered new interface driver hub

<6>[    0.095684] usbcore: registered new device driver usb

<4>[    0.097910] Reboot Reason - Metric Framework Reporting

<6>[    0.097925] kernel: kernel_metric_generic,0,counter,event_recorder,ercflags,SFT_PRSTRT,1,

<4>[    0.097934] Reboot Reason - Legacy Metric Reporting

<3>[    0.097940] 

<6>[    0.101043] MAX77696 TOPSYS 1.0.0 Installed

<6>[    0.103749] max77696-gpio max77696-gpio.0: gpio#0 -- -- func-0 in 

<6>[    0.105214] max77696-gpio max77696-gpio.0: gpio#1 -- -- func--1 in 

<6>[    0.106677] max77696-gpio max77696-gpio.0: gpio#3 -- -- func-0 in 

<6>[    0.108523] MAX77696 GPIO Driver 1.0.0 Installed

<4>[    0.109501] buck mode: 4

<4>[    0.110524] buck mode: 4

<6>[    0.111480] print_constraints: max77696_buck1: 900 <--> 1300 mV at 1250 mV fast normal idle standby

<4>[    0.112083] buck mode: 4

<6>[    0.113033] print_constraints: max77696_buck1dvs: 600 <--> 1300 mV at 900 mV fast normal idle standby

<4>[    0.113619] buck mode: 4

<4>[    0.114359] buck mode: 4

<6>[    0.115301] print_constraints: max77696_buck2: 900 <--> 1300 mV at 1200 mV fast normal idle standby

<4>[    0.115851] buck mode: 4

<6>[    0.116797] print_constraints: max77696_buck2dvs: 600 <--> 1300 mV at 900 mV fast normal idle standby

<6>[    0.117351] print_constraints: max77696_buck3: 600 <--> 3387 mV at 1300 mV fast normal idle standby

<4>[    0.118076] buck mode: 4

<4>[    0.118812] buck mode: 4

<6>[    0.119548] print_constraints: max77696_buck4: 1200 mV fast normal idle standby

<4>[    0.120094] buck mode: 4

<6>[    0.121050] print_constraints: max77696_buck5: 600 <--> 3387 mV at 1800 mV fast normal idle standby

<4>[    0.121625] buck mode: 2

<6>[    0.122570] print_constraints: max77696_buck6: 600 <--> 3387 mV at 3200 mV fast normal idle standby

<6>[    0.122611] MAX77696 Buck Regulators Driver 1.0.1 Installed

<6>[    0.123448] print_constraints: max77696_ldo1: 800 <--> 3950 mV at 3300 mV normal idle standby

<6>[    0.124040] print_constraints: max77696_ldo2: 800 <--> 3950 mV at 3000 mV normal idle standby

<6>[    0.124624] print_constraints: max77696_ldo3: 800 <--> 3950 mV at 2500 mV normal idle standby

<6>[    0.125192] print_constraints: max77696_ldo4: 800 <--> 2375 mV at 1800 mV normal idle standby

<6>[    0.125757] print_constraints: max77696_ldo5: 800 <--> 2375 mV at 1800 mV normal idle standby

<6>[    0.126330] print_constraints: max77696_ldo6: 800 <--> 3950 mV at 3200 mV normal idle standby

<6>[    0.126907] print_constraints: max77696_ldo7: 800 <--> 3950 mV at 3200 mV normal idle standby

<6>[    0.127467] print_constraints: max77696_ldo8: 800 <--> 2375 mV at 1100 mV normal idle standby

<6>[    0.128046] print_constraints: max77696_ldo9: 800 <--> 2375 mV at 1100 mV normal idle standby

<6>[    0.128614] print_constraints: max77696_ldo10: 2400 <--> 5550 mV at 5200 mV normal idle standby

<6>[    0.129402] MAX77696 Linear Regulators Driver 1.0.2 Installed

<6>[    0.130073] print_constraints: max77696_lsw1: 

<6>[    0.130585] print_constraints: max77696_lsw2: 

<6>[    0.130939] print_constraints: max77696_lsw3: 

<6>[    0.131282] print_constraints: max77696_lsw4: 

<6>[    0.131327] MAX77696 Load Switches Driver 1.0.0 Installed

<6>[    0.132573] print_constraints: max77696-display: 

<6>[    0.133352] print_constraints: max77696-vcom: 

<6>[    0.133702] print_constraints: max77696-vee: 

<6>[    0.134067] print_constraints: max77696-vneg: 

<6>[    0.134436] print_constraints: max77696-vpos: 

<6>[    0.134779] print_constraints: max77696-vddh: 

<6>[    0.135785] 

<6>[    0.135789] EPD vreg probe complete!

<6>[    0.136396] print_constraints: max77696_vddq: 240 <--> 984 mV at 600 mV 

<6>[    0.136452] MAX77696 LPDDR2 Termination Supply Driver 1.0.1 Installed

<6>[    0.137888] MAX77696 I2C Driver 1.0.0 Installed

<4>[    0.141310] i2c-core: driver [max17135] using legacy suspend method

<4>[    0.141321] i2c-core: driver [max17135] using legacy resume method

<6>[    0.141355] Switching to clocksource mxc_timer1

<6>[    0.153490] NET: Registered protocol family 2

<6>[    0.153586] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)

<6>[    0.153769] TCP established hash table entries: 16384 (order: 5, 131072 bytes)

<6>[    0.153983] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)

<6>[    0.154092] TCP: Hash tables configured (established 16384 bind 16384)

<6>[    0.154100] TCP reno registered

<6>[    0.154109] UDP hash table entries: 256 (order: 0, 4096 bytes)

<6>[    0.154125] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

<6>[    0.154446] NET: Registered protocol family 1

<6>[    0.154651] RPC: Registered named UNIX socket transport module.

<6>[    0.154660] RPC: Registered udp transport module.

<6>[    0.154667] RPC: Registered tcp transport module.

<6>[    0.154674] RPC: Registered tcp NFSv4.1 backchannel transport module.

<4>[    0.159459] etb: probe of etb failed with error -2

<4>[    0.159755] etm: probe of etm.0 failed with error -2

<6>[    0.160044] Static Power Management for Freescale i.MX6

<6>[    0.160055] wait mode is enabled for i.MX6

<6>[    0.160212] cpaddr = 0 suspend_iram_base=f2900000

<6>[    0.160254] PM driver module loaded

<6>[    0.160528] IMX usb wakeup probe

<7>[    0.160550] the wakeup pdata is 0xde086680

<6>[    0.160906] IMX usb wakeup probe

<7>[    0.160925] the wakeup pdata is 0xde086800

<6>[    0.161087] cpu regulator mode:ldo_bypass

<6>[    0.161504] i.MXC CPU frequency driver

<6>[    0.178426] squashfs: version 4.0 (2009/01/31) Phillip Lougher

<6>[    0.179490] msgmni has been set to 1004

<6>[    0.179963] io scheduler noop registered

<6>[    0.180043] io scheduler cfq registered (default)

<6>[    0.180509] MAX77696 Backlight Driver 1.0.0 Installed

<6>[    0.181335] imx-sdma imx-sdma: loaded firmware 1.1

<6>[    0.186287] imx-sdma imx-sdma: initialized

<6>[    0.188339] Serial: IMX driver

<6>[    0.188457] imx-uart.0: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX

<6>[    0.188485] console [ttymxc0] enabled, bootconsole disabled

<6>[    0.193322] loop: module loaded

<6>[    0.193586] MAX77696 32kHz Oscillator Driver 1.0.0 Installed

<6>[    0.194202] input: max77696-onkey as /devices/platform/imx-i2c.0/i2c-0/0-003c/max77696-onkey.0/input/input0

<6>[    0.197380] MAX77696 ONKEY Driver 1.0.0 Installed

<6>[    0.212735] max77696-rtc max77696-rtc.0: rtc core: registered max77696-rtc.0 as rtc0

<6>[    0.232589] max77696-rtc max77696-rtc.0: rtc core: registered max77696-rtc.1 as rtc1

<6>[    0.252017] MAX77696 RTC Driver 1.0.2 Installed

<6>[    0.252747] snvs_rtc snvs_rtc.0: rtc core: registered snvs_rtc as rtc2

<6>[    0.252927] i2c /dev entries driver

<6>[    0.256965] max77696-battery max77696-battery.0: Voltage alert     3400mV ... 4400mV

<6>[    0.257375] max77696-battery max77696-battery.0: SOC alert         (disabled)

<6>[    0.258289] MAX77696 Fuel Gauge Driver 1.0.0 Installed

<6>[    0.260171] MAX77696 USB Interface Circuit Driver 1.0.0 Installed

<6>[    0.261905] max77696-adc max77696-adc.0: ADC average rate: 32 sample(s)

<6>[    0.261916] max77696-adc max77696-adc.0: ADC delay: 0 nsec

<6>[    0.261925] max77696-adc max77696-adc.0: ADC cur src: 50 uA

<6>[    0.261936] MAX77696 ADC Driver 1.0.1 Installed

<6>[    0.262532] imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=1)

<6>[    0.263333] sdhci: Secure Digital Host Controller Interface driver

<6>[    0.263347] sdhci: Copyright(c) Pierre Ossman

<6>[    0.263459] mmc0: no vmmc regulator found

<7>[    0.264480] sdhci: =========== REGISTER DUMP (mmc0)===========

<4>[    0.264489] 

<4>[    0.264492] 0xe0858000:  00000000 00010200 00000000 083a0000

<4>[    0.264503] 0xe0858010:  00000900 fffffffd 320f5903 00000b00

<4>[    0.264513] 0xe0858020:  00000000 ff888088 08800024 008e0118

<4>[    0.264523] 0xe0858030:  00000000 007f0003 007f0003 00000000

<4>[    0.264534] 0xe0858040:  07f3b407 08000880 00000011 00000000

<4>[    0.264544] 0xe0858050:  00000000 00000000 00000000 00000000

<4>[    0.264554] 0xe0858060:  00000000 00000200 00000000 0800ff00

<4>[    0.264564] 0xe0858070:  00000000 00000000 00000000 00000000

<4>[    0.264574] 0xe0858080:  00000000 00000000 00000000 00000000

<4>[    0.264585] 0xe0858090:  00000000 00000000 00000000 00000000

<4>[    0.264595] 0xe08580a0:  00000000 00000000 00000000 00000000

<4>[    0.264605] 0xe08580b0:  00000000 00000000 00000000 00000000

<4>[    0.264616] 0xe08580c0:  2000780b 00000000 00000006 00212800

<7>[    0.264629] CCM: CSCMR1(0x00900040), CSCDR1(0x00490b40)

<7>[    0.264636] CCM: CCOSR(0x000a000c), CCGR6(0x00000030)

<7>[    0.264643] CCM: CMEOR(0x7fffffff)

<7>[    0.264649] sdhci: ===========================================

<6>[    0.264971] mmc0: SDHCI controller on platform [sdhci-esdhc-imx.1] using DMA

<6>[    0.266047] mmc1: no vmmc regulator found

<7>[    0.267068] sdhci: =========== REGISTER DUMP (mmc1)===========

<4>[    0.267077] 

<4>[    0.267079] 0xe0860000:  00000000 00010000 00000000 00000000

<4>[    0.267091] 0xe0860010:  00000000 00000000 00000000 00000000

<4>[    0.267101] 0xe0860020:  00000000 ff888088 08800020 0080800f

<4>[    0.267112] 0xe0860030:  00000000 007f0003 007f0003 00000000

<4>[    0.267123] 0xe0860040:  07f3b407 08100810 80000000 00000000

<4>[    0.267134] 0xe0860050:  00000000 00000000 00000000 00000000

<4>[    0.267145] 0xe0860060:  00000000 00000200 00000000 0800ff00

<4>[    0.267156] 0xe0860070:  00000000 00000000 00000000 00000000

<4>[    0.267166] 0xe0860080:  00000000 00000000 00000000 00000000

<4>[    0.267176] 0xe0860090:  00000000 00000000 00000000 00000000

<4>[    0.267186] 0xe08600a0:  00000000 00000000 00000000 00000000

<4>[    0.267196] 0xe08600b0:  00000000 00000000 00000000 00000000

<4>[    0.267206] 0xe08600c0:  2000780b 00000000 00000006 00212800

<7>[    0.267219] CCM: CSCMR1(0x00900040), CSCDR1(0x00490b40)

<7>[    0.267227] CCM: CCOSR(0x000a000c), CCGR6(0x000000c0)

<7>[    0.267233] CCM: CMEOR(0x7fffffff)

<7>[    0.267239] sdhci: ===========================================

<6>[    0.267334] mmc0: mmc_rescan_try_freq: trying to init card at 400000 Hz

<6>[    0.268676] mmc1: SDHCI controller on platform [sdhci-esdhc-imx.2] using DMA

<7>[    0.269400] Registered led device: max77696-leds.0

<6>[    0.269409] MAX77696 LED Driver #0 1.0.0 Installed

<7>[    0.269579] Registered led device: max77696-leds.1

<6>[    0.269587] MAX77696 LED Driver #1 1.0.0 Installed

<6>[    0.270015] nf_conntrack version 0.5.0 (8034 buckets, 32136 max)

<6>[    0.270683] ip_tables: (C) 2000-2006 Netfilter Core Team

<6>[    0.270748] TCP cubic registered

<6>[    0.270758] NET: Registered protocol family 17

<6>[    0.270776] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4

<3>[    0.270904] LPDDR2 MfgId: 0x3 [Elpida]

<3>[    0.274889] 

<3>[    0.274892] just text: vaddr c013f678, va 0xc013f200 pa 0x801000c3 attr 0x6

<3>[    0.287434] 

<3>[    0.287437] nmx6sl_wfi_iram: vaddr e084e000, va 0xe084e200 pa 0x904043 attr 0x2

<3>[    0.296282] 

<3>[    0.296285] mx6sl_ddr: vaddr e0856000, va 0xe0856200 pa 0x905043 attr 0x2

<3>[    0.304611] 

<3>[    0.304614] mx6sl_iomux: vaddr f40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x149

<3>[    0.315451] 

<3>[    0.315453] ANATOP: vaddr f40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149

<3>[    0.329800] 

<3>[    0.329803] CCM: vaddr f40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149

<3>[    0.341946] 

<3>[    0.341949] MMDC_P0: vaddr f41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149

<3>[    0.352367] 

<3>[    0.352370] L2: vaddr f2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149

<3>[    0.362323] 

<3>[    0.362326] arm perif: vaddr f2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149

<6>[    0.373085] Bus freq driver module loaded

<6>[    0.373096] Bus freq driver Enabled

<6>[    0.381462] mxc_dvfs_core_probe

<6>[    0.381706] DVFS driver module loaded

<4>[    0.383578] regulator_init_complete: max77696_ldo10: incomplete constraints, leaving on

<4>[    0.384213] regulator_init_complete: max77696_ldo7: incomplete constraints, leaving on

<4>[    0.384433] regulator_init_complete: max77696_ldo6: incomplete constraints, leaving on

<4>[    0.385681] regulator_init_complete: max77696_buck6: incomplete constraints, leaving on

<4>[    0.385899] regulator_init_complete: max77696_buck5: incomplete constraints, leaving on

<4>[    0.386324] regulator_init_complete: max77696_buck2dvs: incomplete constraints, leaving on

<4>[    0.386593] regulator_init_complete: max77696_buck1dvs: incomplete constraints, leaving on

<6>[    0.403160] max77696-rtc max77696-rtc.0: setting system clock to 2000-01-01 01:03:45 UTC (946688625)

<6>[    0.419573] MAX77696 Main Charger Driver 1.0.0 Installed

<6>[    0.422829] MAX77696 Energy Harvester Driver 1.0.0 Installed

<6>[    0.423415] Freeing init memory: 1168K

<6>[    0.452250] emmc: I def:mmcpartinfo:vendor=sandisk, host=mmc0:

<6>[    0.487050] mmc0: new high speed DDR MMC card at address 0001

<6>[    0.487355] mmcblk0: mmc0:0001 SEM04G 3.68 GiB 

<6>[    0.487482] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB

<6>[    0.487609] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB

<6>[    0.488460]  mmcblk0: p1 p2 p3 p4

<6>[    0.490607]  mmcblk0boot1: unknown partition table

<6>[    0.492470]  mmcblk0boot0: unknown partition table

<6>[    0.492647] mmc1: mmc_rescan_try_freq: trying to init card at 400000 Hz

<4>[    0.528974] mxc_epdc_eink: module license 'proprietary' taints kernel.

<4>[    0.528987] Disabling lock debugging due to kernel taint

<4>[    0.529387] INFO:Loaded module /lib/modules/mxc_epdc_eink.ko  (10784 bytes)

<6>[    0.550597] imx_epdc_fb imx_epdc_fb: Found a video mode override (EBA)

<6>[    0.580065] mmc1: mmc_rescan_try_freq: trying to init card at 300000 Hz

<6>[    0.651144] mmc1: mmc_rescan_try_freq: trying to init card at 200000 Hz

<6>[    0.723823] mmc1: mmc_rescan_try_freq: trying to init card at 100000 Hz

<6>[    1.181397] add wake up source irq 104

<6>[    1.666905] Retrieved voltage control information

<6>[    1.726856] kernel: kernel_metric_high_priority,946688626,counter,kernel,max77696-epd,VEE_fault,1,

<6>[    1.726891] kernel: kernel_metric_high_priority,946688626,counter,kernel,max77696-epd,VDD_fault,1,

<3>[    1.726924] max77696-epd max77696-epd.0: EPDINT: Regulator Fault Detected [12]

<3>[    1.734207] Regulator Fault Occurred! Retrying powerup...

<6>[    1.805522] kernel: kernel_metric_high_priority,946688626,counter,kernel,max77696-epd,VEE_fault,1,

<6>[    1.805555] kernel: kernel_metric_high_priority,946688626,counter,kernel,max77696-epd,VDD_fault,1,

<3>[    1.805584] max77696-epd max77696-epd.0: EPDINT: Regulator Fault Detected [12]

<3>[    1.812854] Regulator Fault Occurred! Retrying powerup...

<6>[    1.885530] kernel: kernel_metric_high_priority,946688626,counter,kernel,max77696-epd,VEE_fault,1,

<6>[    1.885561] kernel: kernel_metric_high_priority,946688626,counter,kernel,max77696-epd,VDD_fault,1,

<3>[    1.885590] max77696-epd max77696-epd.0: EPDINT: Regulator Fault Detected [12]

<3>[    1.892886] Regulator Fault Occurred! Retrying powerup...

<6>[    1.921422] kernel: kernel_metric_high_priority,946688627,counter,kernel,imx_epdc_fb,powerup_timeout,1,

<3>[    1.922413] imx_epdc_fb imx_epdc_fb: EPDC powerup timeout/error.

<6>[    1.982377] kernel: kernel_metric_high_priority,946688627,counter,kernel,max77696-epd,VEE_fault,1,

<6>[    1.982409] kernel: kernel_metric_high_priority,946688627,counter,kernel,max77696-epd,VDD_fault,1,

<3>[    1.982439] max77696-epd max77696-epd.0: EPDINT: Regulator Fault Detected [12]

<3>[    1.989678] Regulator Fault Occurred! Retrying powerup...

<6>[    2.065539] kernel: kernel_metric_high_priority,946688627,counter,kernel,max77696-epd,VEE_fault,1,

<6>[    2.065571] kernel: kernel_metric_high_priority,946688627,counter,kernel,max77696-epd,VDD_fault,1,

<3>[    2.065599] max77696-epd max77696-epd.0: EPDINT: Regulator Fault Detected [12]

<3>[    2.072868] Regulator Fault Occurred! Retrying powerup...

<6>[    2.145537] kernel: kernel_metric_high_priority,946688627,counter,kernel,max77696-epd,VEE_fault,1,

<6>[    2.145568] kernel: kernel_metric_high_priority,946688627,counter,kernel,max77696-epd,VDD_fault,1,

<3>[    2.145597] max77696-epd max77696-epd.0: EPDINT: Regulator Fault Detected [12]

<3>[    2.152864] Regulator Fault Occurred! Retrying powerup...

<6>[    2.172347] kernel: kernel_metric_high_priority,946688627,counter,kernel,imx_epdc_fb,powerup_timeout,1,

<3>[    2.173326] imx_epdc_fb imx_epdc_fb: EPDC powerup timeout/error.

<6>[    2.233490] kernel: kernel_metric_high_priority,946688627,counter,kernel,max77696-epd,VEE_fault,1,

<6>[    2.233522] kernel: kernel_metric_high_priority,946688627,counter,kernel,max77696-epd,VDD_fault,1,

<3>[    2.233549] max77696-epd max77696-epd.0: EPDINT: Regulator Fault Detected [12]

<3>[    2.240787] Regulator Fault Occurred! Retrying powerup...

<6>[    2.251415] KERNEL: I pmic:fg battery id check::wario_battery_valid=1

<6>[    2.315540] kernel: kernel_metric_high_priority,946688627,counter,kernel,max77696-epd,VEE_fault,1,

<6>[    2.315572] kernel: kernel_metric_high_priority,946688627,counter,kernel,max77696-epd,VDD_fault,1,

<3>[    2.315601] max77696-epd max77696-epd.0: EPDINT: Regulator Fault Detected [12]

<3>[    2.322869] Regulator Fault Occurred! Retrying powerup...

<6>[    2.395552] kernel: kernel_metric_high_priority,946688627,counter,kernel,max77696-epd,VEE_fault,1,

<6>[    2.395583] kernel: kernel_metric_high_priority,946688627,counter,kernel,max77696-epd,VDD_fault,1,

<3>[    2.395611] max77696-epd max77696-epd.0: EPDINT: Regulator Fault Detected [12]

<3>[    2.402878] Regulator Fault Occurred! Retrying powerup...

<6>[    2.422316] kernel: kernel_metric_high_priority,946688627,counter,kernel,imx_epdc_fb,powerup_timeout,1,

<3>[    2.423327] imx_epdc_fb imx_epdc_fb: EPDC powerup timeout/error.

<3>[    2.429367] imx_epdc_fb imx_epdc_fb: Failed to do initialization sequence -901

<6>[    2.440685] Device spi0.0 removed

<4>[    2.440842] imx_epdc_fb: probe of imx_epdc_fb failed with error -901

<4>[    2.441317] ERROR:insmod(/lib/modules/mxc_epdc_fb.ko) : init_module error: error 19 (19)

<4>[    2.441550] ERROR:eink_init: failed to load eink driver /lib/modules/mxc_epdc_fb.ko: error 19 (19)

<4>[    2.441640] INFO:Rebooting ... 

<4>[    2.441765] ERROR:failed to create failure log... -1 



=== END ===

[    9.987085] imx2-wdt imx2-wdt.0: Device shutdown: Expect reboot!

[    9.994245] Restarting system.

↧

Restrictions on sideloading?

October 29, 2015, 5:51 am

≫ Next: WiFi freeze on K3 4.3.2

≪ Previous: Is my Kindle Voyage screen broken

I saw a post on another forum claiming the new Kindle Fire ($49 cheapie one) was restricted from sideloading books. I didn't find anything doing a search. It specifically mentions sideloading from the sd card.

Is it really restricted from sideloading.....I can't imagine that would be true....but....

???

↧

WiFi freeze on K3 4.3.2

October 29, 2015, 8:13 am

≫ Next: White Kindle touch available in UK

≪ Previous: Restrictions on sideloading?

On occasion I run into a "WiFi freeze" on my K3 where when I go into settings and select the WiFi settings the selection shades but never shows the networks available. After a while the shading goes away and I never see the networks available.

The only way I have found to deal with this situation is to use the LaunchPad [Shitft][Shift]R shortcut to restart the K3, which of course takes several minutes before I can again use the K3.

I have myts installed and can access a terminal window on the K3. Is there a terminal window command I can issue that could correct this without need for the restart?

Dave

↧

White Kindle touch available in UK

October 30, 2015, 4:01 am

≫ Next: Question about memory

≪ Previous: WiFi freeze on K3 4.3.2

I was looking at the Amazon site this morning and noticed that the kindle touch is now available in white

http://www.amazon.co.uk/dp/B014PYAJ2A/

↧

Question about memory

October 30, 2015, 5:29 pm

≫ Next: New version of K4PC this morning

≪ Previous: White Kindle touch available in UK

Two years ago I bought the most inexpensive Kindle available, which at that time we here called the "Kindle 4." It has the page buttons on the side and the four-way button below the screen.

I have most of my Kindle books on Amazon's cloud, but plenty on the Kindle as well.

I believe that the unit is changing pages much more slowly than it did when it was new. Could it be that this is caused by my having too many books on the unit, and not enough remaining memory?

Currently it has 258 MB free. Any recommendations regarding the best amount of free memory to have?

Thanks!

↧

New version of K4PC this morning

October 31, 2015, 4:40 am

≫ Next: From Papewhite 2 to Paperwhite 3

≪ Previous: Question about memory

My installation of K4PC auto-updated itself this morning to version 1.12.4. No obvious changes, and "the tools" still work fine with it. It downloaded half a dozen new books that I'd bought, all of which were downloaded as KF8, so no sign of KFX for this application yet.

↧

From Papewhite 2 to Paperwhite 3

October 31, 2015, 7:52 am

≫ Next: Confused about Clippings

≪ Previous: New version of K4PC this morning

I'm sure this has been discussed, so if someone could point me to a link, that would be great.... or if you could tell me how much of a difference there is between the two, that would be great. I have the PW2 but, i just like the latest! :p Thank you!

↧